Відео

Great video, thank you man you’re channel has helped me a ton

Thanks! Thinking about putting something larger on my front wheel...

Would this be possible on a ouxi v8?

Where to buy this plastic output?

it is now confirmed that the s65 is built well😂

Does this work if you take pro head and connect it to the non pro

Why are you bending it next to the brake caliper You have to do it in the bottom turn it all the way down. Because the top is bending next to the brake caliper. This will take long but my way is faster

Got any hack's or mods for Carrera ebikes?

I want to know.have every bike this 3 pin connector??? Possible install coswheel T20/T20R

Great job

Got a mountain bike and my front wheel is making noise I checked what the sound was and I'm pretty sure it's my brakes rubbing against that disk or whatever it's called do you know how I can fix that

Need to check motor control via cell phone app. Bypass throttle Can u send me link to video

Need to check motor control via cell phone app. Bypass throttle Can u send me link to video

where can you buy brake pads for escooters?

Offroad Scooting is so fun! Please ditch the sandals tho, that is asking for a hospital visit and also sets a bad example for others trying to get into this. Lets not make scooting regulated!

😂

It doesn’t seem like it should be that easy to remove a nut like that, that easily with a plastic socket 🤔

Hello Pirate. I have watched many of your videos regarding the Ti30 that I also own. Thank you for the good work. I was thinking of shunt modding the Ti30, but I already had a controller failure happen (unmodded) and I had to replace both controllers... I couldn't really find the exact same one, just controllers that are meant for the Ti30 (maybe that's a good thing). Unfortunately the wires didn't match and I wasn't confident (not having the required knowledge...) enough to do it myself. So I went to the only professional in my city that could do it... (yes, there was only one that could do it, probably one of the very few in the whole country). 70$ later and it was ready, but inside it was an unruly wire mess... Anyways, my point is that I was thinking of shunt modding the scooter, but I feel like the controllers might not be able to take it. I had heavily shunt modded a 2000W (48V) controller in the past and was it drawing 5000W without any real issues (yeah, 2.5 times more amps xD) With the laotie I would be happy if it could pull 1.5-2 times more current. At the moment I have built an external battery (soon to build a new internal one) which by itself is more powerful than the stock one. From my measurements, the stock controllers were pulling 120A (that shouldn't be the case 😅 which makes me think that maybe the professional shunt modded them and didn't tell me 😅). That translates to 8000W when fully charged 🤣 7500W if we factor in voltage drop, but we don't if we want to compare with stock 5600W. And 120A is really what I feel comfortable with this battery to output. It's a 16S10P battery capable of outputting 120-140A continuous and something like 200A peak. (If you are wondering where this external battery is mounted, it replaced the existing saddle and now is in an aluminum box with a diy cushion saddle as a lid). My plan is to build a new internal battery (because the stock chinese one really can't handle the current and is slowly dieing...I compared both batteries and the external one is much more powerful) and then connect internet and external in parallel. That was I will have a battery capable of 240A continuous (don't ask me what will happen to the XT60 connectors and small cables of the controllers 🤣, since motors mostly work high for very few seconds, I guess they won't melt). This is enough for up to 16kW of continuous power. So Pirate... I want your opinion. 1. Do you know if 8000W is normal for my controllers or if it's actually modded without me knowing it? 2. It would make for a great video if you could shunt mod such a powerful scooter, would you be willing to try it (you have more knowledge than me, I guess you could replace a controller if it was damaged...). 3. Since shunt modding only increases torque and not top speed, is it really worth it for an already very powerful scooter. It loses traction anyways... Will it be able to grip if we applied double the torque? ¯⁠\⁠_⁠(⁠ツ⁠)⁠_⁠/⁠¯ I'd love to hear from you and potentially watching a video where you do something crazy like that xD (you will need an extremely powerful battery, either built by 18650 (power tool grade, capable of 25A each) or something like my idea with an external battery (I just did it for the extra range, but turns out I was able to get more power too...)). Byeeee

Very helpful video thanks! Do you have a part number or link to the display you show at 3:20?

First one ypu talk about won't take anymore than 56.25 v from memory so yeah got the 75100 heats up like my oven

Where’s part 2?

Why not remove the motor from the wheel (6 bolts), slide the tire on and reattach the motor? No struggling trying to force the tire onto the rim, which could damage the rim. Works for me.

its a bad repair, it will work, but isnt realy good.Buy 3 new is under 5€ soldering and make new isolation.

what is the name of the speedometer software ?

Yeah i have a y11 and the guts are in my opinion a bit better as far as the motor connectors. What is that? Some plastic with electrical tape? And that is way too many lights. Less is more 4 me. I took mine complete apart last week to swap out a controller and pull both motors to change the tires, which was a total bitch. So anywho i wish they would use some of the old designs with the new. Easy as hell to work in. Has plenty of room. Wire management could be a tad better though. Other than that, let the good times roll.....peace

Bro what tools are you using?

What are the tools?

I thought I'd have to remove the rear wheel.... THANKS FOR POSTING!

Were the fk is the Link for the Vsec tool download?

hi everyone, has anyone got new cooling fans for this gamaing mi laptop my fans has stoped working and i need to buy new fans but i am haveing hard time to fingd the correct fan model can anyone help me with the correct model and from there i can buy i am in US now

Can I use it with my woman?

Thank you 🤘 100% better

If there was already a designated wire that you could connect and disconnect for the limiter, could you do the same thing for that one wire?

Bro I have the same skoter but don’t know how to fix the breaks

I just bought this, will review on your site when it comes in. Thanks 🎉

Awesome!!! Where can I get these parts from?

Would it be possible to install it inside the scooter? And only have the usb c port exposed?

now put vesc in it 😂😂 extra power mowing haha (jk, but would be fun to try no?) also yea much much better than those expensive batteries

my bike has a key with only red and black does that mean I only use the black and red wire for the alarm and not the orange?

A lot of misinformation sadly

Bonjour il y a une chambre a air dans le pneu ?

If you only charge to 40.5V - isn't it to low to make the bms balance the cells?

how did you open the motor. i unscrew the screws of the motor but it doesnt come out

Tooop,trotinat,foor❤

hey pirate, i really like your videos. I need your help. How did you took the hub motor out of the wheel because mine is stuck and i dont know how to it out. also how many cm is the hall sensor circuit because i need to order one

Two batteries okay for 60-70km, of course im not 50kg....

I have the same scooter, I will never get those cheap tires ever again, what a nightmare getting them off and on, you got lucky, I learned alot from the first time, I used grease instead of soap to seal the beed... It wouldn't seal, I need to blast it with 130 psi so it would properly seal, I also recommend spending more money to get better tires with thick rubber and tiny spaces between the main tread, because you don't want to replace your tires ever again after doing it once lol

hi, does the application show the current and power of only one controller or does it sum the readings of two controllers and display it on the screen?

Hey man what are the size and model of the nuts that lock the motor in the place? i cannot find them anywhere

Can I download the .stl file somewhere to print it?